Worldwide Patented Products by Electrix®
At Electrix®, research and development is ongoing to ensure we maintain our position as the world's leading manufacturer of Stainless Steel Electrical Enclosures and Cable Management Systems.
First introduced in 2003, our unique Internal Wall Fixing Points are a standard feature of many of our enclosures. Saving you time and money on site, it is easy to see why the Internal Wall Fixing Points have been adopted worldwide as the most hygienic and robust mounting solution available for Stainless Steel Enclosures.
As part of our ongoing continuous improvement at Electrix®, our new WASHDOWNPRO™ range of enclosures have all been designed to feature our new and improved IP69K / IP66 Internal Threaded Wall Fixing Points. In much the same way as our original model, these Wall Fixing Points allow the enclosures to be installed without compromising the IP69K / IP66 rating as no mounting holes need drilling on site. This prevents the ingress of water and dust into the enclosure body, enhances the wash down suitability of the enclosures as well as saving you both time and money.
To further enhance your wash down installation and to provide you with the ultimate hygienic solution, the improved IP69K / IP66 Internal Threaded Wall Fixing Points also work in harmony with our Removable Stand-Off Mounting Pillars 🗗.
- Remove the Internal Wall Fixing Point Caps, using a 5 mm (3/16") Allen Key (sold separately - Electrix® part: AK-5 🗗).
- Attach the enclosure to the desired mounting surface using appropriate fixings for the application, making sure the head of each screw is countersunk and contained within the Internal Wall Fixing Point Base.
- Refit the Internal Wall Fixing Point Caps, ensuring the o-ring is correctly installed, and tighten to 6 Nm (53.1 lb-in) using an Allen Key.
- Unused wall fixing points can be covered externally by using our External Wall Fixing Point Cover Kits 🗗.
Removable Stand-Off Mounting Pillars
If your installation requires thorough cleaning behind the enclosure, our Removable Stand-Off Mounting Pillars are the ideal solution to achieve this. The pillars are threaded to allow them to fit perfectly into pre-formed holes at the rear of the enclosure.
External Wall Fixing Point Cover Kits
In some circumstances, the installation of a WASHDOWNPRO™ enclosure may result in unused wall fixing points remaining visible to users.
Although Electrix® enclosures maintain their IP69K / IP66 / Type 4X rating and uncompromised hygiene even with these apertures exposed, to achieve the ultimate in hygiene and aesthetics, we recommend using our External Wall Fixing Point Cover Kits 🗗.