Skip to main content

UK INTER32 | Metric Conduit Intersection Box

Share
Stock available within 5 working days

Electrix® Metric Conduit Intersection Boxes, in 316C16F stainless steel with a 316L - V4A - 1.4404 stainless steel lid, can be used to change direction during an installation and to provide additional outlets for conduit runs, whilst the removable lid provides access for inspection and installation purposes.

The world's first complete Stainless Steel Conduit System, invented by Electrix®, is known for its unrivalled quality and aesthetics.

Since the system was launched over 25 years ago, it has been specified by the world's largest companies, for projects ranging from oil rigs to monuments, tunnels to chemical processing plants.

This intersection, complete with an internal earth point, is compatible with our 32 mm Metric Conduit System.

Each intersection box is supplied with a lid, gasket, screws & washers.

Material Information
  • Material TypeStainless Steel
  • Material GradeLid: 316L - V4A - 1.4404
    Base: 316C16F
  • Material FinishLid: Satin (Brushed)
    Base: Electropolished
Dimensions
  • Conduit Ø (mm)32
  • Size Ø (mm)32
Conduit Information
  • Thread TypeMetric
  • Female ThreadMetric
  • Thread DetailsISO form 1.5 mm pitch
  • Conduit Box Ø (mm)81
  • Gasket Material2 mm Neoprene Rubber
  • Number of Lid Fixings4
Ratings & Standards
  • ApprovalsUL ClassifiedIP67
  • UL InformationEvaluated in accordance with
    European Standard EN 50086
    File Number: E233497 (2MD9)
  • Environmental RatingIP67*
  • Operating Temperature (without Impact)-25°C to +110°C (-13°F to +230°F)
For Use With
  • For Conduit Ø (mm)32
General Information
  • Supplied WithLid, Gasket & Lid Fixings
  • Ideally Suited ForOffshore, Chemical, Food, Dairy, Brewing, Pharmaceutical, Soft Drinks, Architectural companies & many more
  • Compatible WithMetric Conduit
  • Pack Quantity1
  • Weight (kg)0.74
  • Commodity Code73071990
  • Fine Print*IP/TYPE rating is only maintained when all apertures are adequately sealed.
    It is the installer's responsibility to check that the earth / ground lead is suitable for the intended application.
  • DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.

There are currently no reviews, be the first to review.

Login