Skip to main content

UK UBOX20 | Metric Conduit Branch Two Way Box

78 in stock

Electrix® Metric Conduit Branch Two Way Boxes, in 316C16F stainless steel with a 316L - V4A - 1.4404 stainless steel lid, can be used to change direction during an installation, whilst the removable lid provides access for inspection and installation purposes.

The world's first complete Stainless Steel Conduit System, invented by Electrix®, is known for its unrivalled quality and aesthetics.

Since the system was launched over 35 years ago, it has been specified by the world's largest companies, for projects ranging from oil rigs to monuments, tunnels to chemical processing plants.

This IP69K / IP67* branch two way box, complete with an internal earth point, is compatible with our 20 mm Metric Conduit System.

Each branch two way box is supplied with a lid, gasket, screws & washers.

Material Information
  • Material TypeStainless Steel
  • Material GradeLid: 316L - V4A - 1.4404
    Base: 316C16F
  • Material FinishLid: Satin (Brushed)
    Base: Electropolished
Dimensions
  • Conduit Ø (mm)20
  • Size Ø (mm)20
Conduit Information
  • Thread TypeMetric
  • Female ThreadMetric
  • Thread DetailsISO form 1.5 mm pitch
  • Conduit Box Ø (mm)60.3
  • Gasket Material2 mm Neoprene Rubber
  • Number of Lid Fixings2
Ratings & Standards
  • ApprovalsUL ClassifiedIP69KIP67
  • UL InformationEvaluated in accordance with
    European Standard EN 50086
    File Number: E233497 (2MD9)
  • Environmental RatingIP69K / IP67*
  • Operating Temperature (without Impact)-25°C to +110°C (-13°F to +230°F)
For Use With
  • For Conduit Ø (mm)20
General Information
  • Supplied WithLid, Gasket & Lid Fixings
  • Ideally Suited ForOffshore, Chemical, Food, Dairy, Brewing, Pharmaceutical, Soft Drinks, Architectural companies & many more
  • Compatible WithMetric Conduit
  • Pack Quantity1
  • Weight (kg)0.36
  • Commodity Code73071990
  • Fine Print*IP rating is only maintained when all apertures are adequately sealed.
    In order to achieve this IP rating, the use of a suitable thread sealant is required on the final 3x threads of engagement.
    Earth / ground continuity must be maintained at all times.
  • DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.

There are currently no reviews for this product.

Login