Skip to main content

ELEC-TYPE-TB3/4 | NPT Conduit TB Body (Rear Entry Tee Box)

Stock available within 5 working days

Electrix® NPT Conduit TB Bodies (Rear Entry Tee Boxes), 316C16F stainless steel with a 316L - V4A - 1.4404 stainless steel lid, can be used to change direction during an installation and to provide an additional outlet for conduit runs, whilst the removable lid provides access for inspection and installation purposes.

The world's first complete Stainless Steel Conduit System, invented by Electrix®, is known for its unrivalled quality and aesthetics.

Since the system was launched over 35 years ago, it has been specified by the world's largest companies, for projects ranging from oil rigs to monuments, tunnels to chemical processing plants.

This IP69K* rear entry tee box, complete with an internal earth point, is compatible with our 3/4" NPT Conduit System.

Each rear entry tee box is supplied with a lid, gasket & screws.

Material Information
  • Material TypeStainless Steel
  • Material GradeLid: 316L - V4A - 1.4404
    Base: 316C16F
  • Material FinishLid: Satin (Brushed)
    Base: Electropolished
  • Conduit Ø (in.)3/4
Conduit Information
  • Thread TypeNPT
  • Female ThreadNPT
  • Thread DetailsTapered
  • Gasket MaterialSilicone - FDA Approved
Ratings & Standards
  • ApprovalscULus ListedIP69KIP66
  • UL InformationMetallic Outlet Boxes UL514A
    Metallic Outlet Boxes C222 No. 18. 1-04
    File Number: E300646 (32XW)
  • Environmental RatingIP66 / IP69K*
    Type 4X*
For Use With
  • For Conduit Ø (in.)3/4
General Information
  • Supplied WithLid, Gasket & Lid Fixings
  • Ideally Suited ForOffshore, Chemical, Food, Dairy, Brewing, Pharmaceutical, Soft Drinks, Architectural companies & many more
  • Compatible WithNPT Conduit
  • Pack Quantity1
  • Weight (kg)1
  • Commodity Code73071990
  • Fine Print*IP/Type will only be maintained when all conduit entries and couplings have been adequately sealed. Earthing must be carried out in accordance with local electrical regulations. The use of a thread sealant is recommended on the last two threads of engagement with the conduit body.
  • DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.

There are currently no reviews for this product.