- Material TypeStainless Steel
- Material Grade316L - V4A - 1.4404
- Material FinishPolished
- Surface Finish (µm Ra)< 0.5
- Material Thickness for Lid (mm)2.0
- Material Thickness for Base (mm)1.2
- Lid Size (H x W mm)209 x 326
- Back Box Size (H x W x D mm)160 x 280 x 85
- Fixing Flange Size (H x W mm)200.5 x 320.5
- Back Box Height (mm)160
- Fixing Flange Height (mm)200.5
- Lid Height (mm)209
- Back Box Width (mm)280
- Lid Width (mm)326
- Fixing Flange Width (mm)320.5
- Back Box Depth (mm)85
- Custom Design
Custom Designs available on request.
- Custom sizes
- Pre-lasered cable entry holes & laser cut apertures
- Extra hygienic lid fixing screws
- Security lid fixing screws
- Additional DIN rails
- Alternative switch handle hole configurations
- Dimension TolerancesPlease refer to our CAD files for further details or contact a member of the Electrix Team.
- Switch SuppliedYes x 2
- Switch Details30 A (3 Pole)
- Maximum Switch Rating (A)30
- General Use @ 600 VAC40 A (per Switch)
- AC-21A @ 690 VAC63 A (per Switch)
- AC-23A @ 415 VAC40 A (per Switch)
- AC-23A @ 690 VAC32 A / 30 kW (per Switch)
- Switching Capacity (1 PH)
120 VAC - 2.0 HP 240 VAC - 5.0 HP
Note: Values per switch
- Switching Capacity (3 PH)
208 VAC - 7.5 HP 415 VAC - 15.0 HP 480 VAC - 20.0 HP 600 VAC - 15.0 HP
Note: Values per switch
- Suitable as a Motor DisconnectYes
- OSHA CompliantHigh visibility red / yellow handle - 3 x lockout (LO) / tagout (TO) positions per handle
- Switch Defeat MechanismNo
- Captive Lid FixingsYes
- Lift-off Lid / CoverYes
- Fixing MethodSupplied with self-tapping screws
- DIN Rail1 x Fitted
- DIN Rail Length (mm)260
- DIN Rail Style35 mm (W) x 15 mm (H) - Top Hat
- DIN Rail PositionHorizontal / Central
- EarthingEarth terminals & 1 x earth / ground lead*
- UL InformationIndustrial Control Panel Enclosure (NITW)
In accordance with UL508A
CSA C22.2 No. 14-13*
File Number: E233527
- CE InformationEN 60947-5-1
- Hygiene StandardsNSF/ANSI/3A 14159-1 Hygiene Requirements for
the Design of Meat and Poultry Processing Equipment
- Environmental RatingIP66*
Type 1 / 3 / 5 / 12 / 13 / 4 / 4X*
- Operating Temperature (without Impact)-40°C to +60°C (-40°F to +140°F)
- Supplied WithRotary Isolator Switch (x2), Fixing Flange with Blue Silicone Gasket, Self-Tapping Screws, DIN Rails (complete with mounted earth block & auxiliary contact 1 NO/1 NC), Lid Gasket, Lid Fixings & Earth Terminals
- Ideally Suited ForOffshore, Chemical, Food, Dairy, Brewing, Pharmaceutical, Soft Drinks, Architectural companies & many more
- Alternative Material Finish / GradeSatin (Brushed) 316L - V4A - 1.4404
- Pack Quantity1
- Weight (kg)3.71
- Commodity Code85371098
- Fine Print*IP / TYPE rating is only maintained when all apertures are adequately sealed. This is an open enclosure unless suitably rated auxiliary devices are installed to fill the openings.
- DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.
Please agree to our Terms and Conditions to download this file* Please read and agree to the following terms to access this file.
Thank you for choosing to download a CAD file.
Every effort has been made to ensure that the CAD file you are downloading is accurate, but please be advised that any drawing, image or description is for illustration purposes only.
From time to time we may update product designs, therefore if the dimensions or design of our product is a crucial for your project, it is recommended that you contact us prior to placing your order to confirm your requirements.
As per our standard Terms and Conditions 🗗, Electrix cannot be held responsible for any assumptions made by the customer with regard to the specification of the product.