Skip to main content

PH-SKT30X2-W8-105-S316 | Flush Mounted Pharma Enclosure with 2 x Rotary Isolator Switches and Hinged Viewing Window

2 in stock

Electrix® Flush Mounted Rotary Isolator Enclosures with hinged viewing windows, in 316L - V4A - 1.4404 stainless steel, are supplied with the switches fitted to enable a faster installation on site, with a hinged viewing window for easier access to DIN rail mounted MCBs, RCDs & RCBOs (not supplied).

Designed to be used where all cabling is conveyed within the cavity of the wall, the main body of the enclosure is recessed meaning that only the lid section and optional components are visible.

This IP66* satin (brushed) finish flush mounted rotary isolator enclosure, is 280 x 280 x 105 (back box H x W x D mm) / 329 x 326 (lid H x W mm).

Complete with 2 x rotary isolator switch / disconnect (30 A - 3 Pole), IP66 hinged viewing window (8 modules wide - 144 mm), fixing flange with blue silicone gasket, self-tapping screws, DIN rail x2 (complete with mounted earth block & auxiliary contact), gasketed lid, captive lid fixing screws, earth terminals & earth link.

Suitable as a Motor Disconnect.

Material Information
  • Material TypeStainless Steel
  • Material Grade316L - V4A - 1.4404
  • Material FinishSatin (Brushed)
  • Surface Finish (µm Ra)< 0.5
  • Material Thickness for Lid (mm)2.0
  • Material Thickness for Base (mm)1.2
Dimensions
  • Lid Size (H x W mm)329 x 326
  • Back Box Size (H x W x D mm)280 x 280 x 105
  • Fixing Flange Size (H x W mm)320.5 x 320.5
  • Back Box Height (mm)280
  • Fixing Flange Height (mm)320.5
  • Lid Height (mm)329
  • Back Box Width (mm)280
  • Lid Width (mm)326
  • Fixing Flange Width (mm)320.5
  • Back Box Depth (mm)105
Isolator / Disconnect Information
  • Switch SuppliedYes x 2
  • Switch Details30 A (3 Pole)
  • Maximum Switch Rating (A)30
  • FusedNon-Fused
  • Suitable as a Motor DisconnectYes
  • OSHA CompliantHigh visibility red / yellow handle - 3 x lockout (LO) / tagout (TO) positions per handle
  • Switch Defeat MechanismNo
Enclosure Information
  • Captive Lid FixingsYes
  • Lift-off Lid / CoverYes
  • Windows Can Accommodate8
  • Fixing MethodSupplied with self-tapping screws
  • DIN Rail2 x Fitted
  • DIN Rail Length (mm)260
  • DIN Rail Style35 mm (W) x 15 mm (H) - Top Hat
  • DIN Rail PositionHorizontal x 2
  • Adhesive labels on Lid / CoverYes
  • EarthingEarth terminals & 1 x earth / ground lead*
Ratings & Standards
  • ApprovalsNSFip66
  • Hygiene StandardsNSF/ANSI/3A 14159-1 Food Equipment
    for use in food processing areas
  • Environmental RatingIP66*
  • Operating Temperature (without Impact)-25°C to +70°C (-13°F to 158°F)
General Information
  • Supplied WithRotary Isolator Switch (x2), IP66 Hinged Viewing Window (8 modules wide - 144 mm), Fixing Flange with Blue Silicone Gasket, Self-Tapping Screws, DIN Rails (complete with mounted earth block & auxiliary contact 1 NO/1 NC), Lid Gasket, Lid Fixings, Earth Terminals & Earth Link
  • Ideally Suited ForOffshore, Chemical, Food, Dairy, Brewing, Pharmaceutical, Soft Drinks, Architectural companies & many more
  • Alternative Material Finish / GradePolished 316L - V4A - 1.4404
  • Pack Quantity1
  • Weight (kg)3.38
  • Commodity Code85371098
  • Fine Print*IP rating is only maintained when all apertures are adequately sealed. This is an open enclosure unless suitably rated auxiliary devices are installed to fill the openings.
    It is the installer's responsibility to check that the earth / ground lead is suitable for the intended application.
  • DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.

There are currently no reviews, be the first to review.

Login