Skip to main content

SL-XPB1-S316-22.5 | WASHDOWNPRO IP69K Flat Roof Slimline Push-Button Enclosure with Removable Mounting Pillars

In Stock

The Ultimate Washdown Range

Our new WASHDOWNPRO slimline lid enclosure range has been designed specifically for the Food, Dairy, Brewing, Soft Drinks and Pharmaceutical industries, where stringent cleaning guidelines are regularly observed.

Designed to accommodate push-buttons, switches and pilot lights from a variety of manufacturers, these IP69K Flat Roof Slimline Lid Push-Button Enclosures with Removable Stand-Off Mounting Pillars, in 316L - V4A - 1.4404 stainless steel, have been certified by NSF International 🗗, making them the ideal solution for washdown environments where high-pressure and high-temperature cleaning equipment is regularly used.

Worldwide Patented Products

Invented by Electrix®, the WASHDOWNPRO range of enclosures feature our unique IP69K / IP66 Internal Threaded Wall Fixing Points and Removable Stand-Off Mounting Pillars, to facilitate cleaning procedures and allow the enclosures to be installed a fixed distance away from the mounting surface, without compromising the IP rating. These unique features save you time and money by reducing the amount of extra drilling required on site.

WASHDOWNPRO Hygienic Benefits:

This satin (brushed) finish flat roof push-button enclosure is 102 x 102 x 70 mm with 1 x 22.5 mm push-button aperture in the lid.

Complete with easy to clean 19 mm removable stand-off mounting pillars, gasketed lid, captive lid fixing screws & earth terminals.

IP69K / IP66*
Type 1 / 3 / 5 / 12 / 13 / 4 / 4X*

Material Information
  • Material TypeStainless Steel
  • Material Grade316L - V4A - 1.4404
  • Material FinishSatin (Brushed)
  • Surface Finish (µm Ra)< 0.5
  • Material Thickness (mm)1.5
  • Size (H x W x D mm)102 x 102 x 70
  • Height (mm)102
  • Width (mm)102
  • Depth (mm)70
  • Custom Design

    Custom Designs available on request.

    • Polished Finish
    • Custom sizes
    • Pre-lasered cable entry holes & laser cut apertures
    • Extra hygienic lid fixing screws
    • Security lid fixing screws
    • DIN Rails or Gear Plates
    • Alternative hole configurations
    Click here to visit The Custom Shop 🗗.
  • Internal Threaded Wall Fixing PointsThe new WASHDOWNPRO range of enclosures include our unique IP69K / IP66 Internal Threaded Wall Fixing Points. Invented by Electrix®, the Wall Fixing Points allow the enclosure to be installed without compromising the IP69K / IP66 rating, and reduce the amount of extra drilling required on site, saving you time and money.
  • Removable Stand-Off Mounting PillarsIf your installation requires thorough cleaning behind the enclosure, our WASHDOWNPRO Removable Stand-Off Mounting Pillars 🗗 are the ideal optional extra to achieve this. The pillars are threaded to allow them to fit perfectly into pre-formed holes at the rear of the enclosure, whilst the silicone washers assist with the hygiene of the installation.
  • External Wall Fixing Point Cover Kits

    In some circumstances, the installation of a WASHDOWNPRO enclosure may result in unused wall fixing points remaining visible to users.

    Electrix® enclosures maintain their IP69K / IP66 / Type 4X rating and uncompromised hygiene even with these apertures exposed. However, when you need the ultimate in hygiene and aesthetics, we recommend using our WASHDOWNPRO External Wall Fixing Point Cover Kits 🗗.

    If you would like to cover all of the wall fixing points, you will require 4 covers in total for this enclosure.

Push-Button Information
  • Push-Button SuppliedPush-buttons not included
    Compatible with all brands of push-buttons, switches and pilot lights
    Hole diameter complies with IEC 60947-5-1
  • Number of Holes1
  • Hole Keyways4
  • Hole LocationLid
  • Hole Pattern1 central
Enclosure Information
  • Captive Lid FixingsYes
  • Lid / Cover Gasket MaterialUL Recognised Neoprene EPDM Closed Cell (One Piece)
  • Lift-off Lid / CoverYes
  • Fixing MethodIP69K / IP66 Internal Threaded Wall Fixing Points with 19 mm Removable Stand-Off Mounting Pillars - Suitable for use with M6 countersunk fixings when the stand-off mounting pillars are in use, and up to M8 countersunk fixings when the pillars are not used.
  • Stand-Off Mounting Pillar Gasket MaterialBlue Silicone Rubber
  • Internal Wall Fixing Points2
  • NEC Airspace Fixings19 mm Removable Stand-Off Mounting Pillar exceeds NEC airspace requirements for Metal Enclosures
  • Compact FootprintYes
  • Adhesive labels on Lid / CoverNo
  • EarthingEarth terminals
Ratings & Standards
  • ApprovalscULus ListedNSFIP69KType 4XIP66CE
  • UL InformationIndustrial Control Panel Enclosure
    In accordance with UL508A
    CSA C22.2 No. 14-13
    File Number: E233527
  • CE InformationEN 60670-1
    EN 60529
    EN 63000
  • Hygiene StandardsNSF/ANSI/3A 14159-1 Hygiene Requirements for
    the Design of Meat and Poultry Processing Equipment
  • Environmental RatingIP69K / IP66*
    Type 1 / 3 / 5 / 12 / 13 / 4 / 4X*
  • Operating Temperature (without Impact)-40°C to +121°C (-40°F to +250°F)
General Information
  • Supplied WithEasy to clean 19 mm Removable Stand-Off Mounting Pillars, IP69K / IP66 Internal Threaded Wall Fixing Points, Lid with Gasket, Captive Lid Fixing Screws & Earth Terminals
  • Ideally Suited ForOffshore, Food, Dairy, Brewing, Pharmaceutical, Soft Drinks, Architectural companies & many more
  • Pack Quantity1
  • Weight (kg)0.67
  • Commodity Code73269098
  • Fine Print*IP / Type rating is only maintained when all apertures are adequately sealed. This is an open enclosure unless suitably rated auxiliary devices are installed to fill the openings.
  • DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.

There are currently no reviews for this product.