Skip to main content

MRF FT90 450 | Medium Duty Return Flange Cable Tray 90° Flat Tee

Share
6 in stock

Electrix® Medium Duty Return Flange Cable Tray Flat Tees, in 316L - V4A - 1.4404 stainless steel, are used to change direction during an installation and to provide an additional outlet for cable tray runs.

This 90° flat tee is compatible with our 450 mm wide Medium Duty Return Flange Cable Tray System.

Couplings are sold separately - Electrix recommends 1 x pair of straight couplings (Part No. MRF CO) and 2 x pairs of cranked couplings (Part No. MRF CC) for each flat tee.

2 x free fish-plates with the necessary nuts & screws are supplied (Part No. M/HRF FP 450) to provide additional strength for joints.

Optional lids are available for this range.

Material Information
  • Material TypeStainless Steel
  • Material Grade316L - V4A - 1.4404
  • Material FinishDull (2B)
  • Surface Finish (µm Ra)< 0.5
  • Material Thickness (mm)1.2
Dimensions Cable Tray Information
  • StandardMedium Duty
  • Wall TypeReturn Flange
  • Wall Height (mm)30
  • Bend Angle90°
  • Bend DirectionFlat
  • Fish-plate ProvidedYes
For Use With
  • For Tray Width (mm)450
General Information
  • Supplied WithFish-plates, Nuts & Screws
  • Ideally Suited ForOffshore, Chemical, Food, Dairy, Brewing, Pharmaceutical, Soft Drinks, Architectural companies & many more
  • Compatible WithMedium Duty Return Flange Cable Tray
  • Pack Quantity1
  • Weight (kg)4.76
  • Commodity Code73269098
  • DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.

There are currently no reviews for this product.

Login