Skip to main content

FT90-D 152 | Medium Duty Straight Edge Cable Tray 90° Flat Tee

Share
9 in stock

Electrix® Medium Duty Straight Edge Cable Tray Flat Tees, in 316L - V4A - 1.4404 stainless steel, are used to change direction during an installation and to provide an additional outlet for cable tray runs.

This 90° flat tee is compatible with our 152 mm wide Medium Duty Straight Edge Cable Tray System.

Each tee is supplied with 3 x couplings, nuts & screws .

Material Information
  • Material TypeStainless Steel
  • Material Grade316L - V4A - 1.4404
  • Material FinishDull (2B)
  • Surface Finish (µm Ra)< 0.5
  • Material Thickness (mm)1.2
Dimensions Cable Tray Information
  • StandardMedium Duty
  • Wall TypeStraight Edge
  • Wall Height (mm)27
  • Bend Angle90°
  • Bend DirectionFlat
For Use With
  • For Tray Width (mm)152
General Information
  • Supplied WithCouplings, Nuts & Screws
  • Ideally Suited ForOffshore, Chemical, Food, Dairy, Brewing, Pharmaceutical, Soft Drinks, Architectural companies & many more
  • Compatible WithMedium Duty Straight Edge Cable Tray
  • Pack Quantity1
  • Weight (kg)2.18
  • Commodity Code73269098
  • DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.

There are currently no reviews for this product.

Login