Skip to main content

UK BE20 | Metric Conduit Back Entry Box

Share
240 in stock

Electrix® Metric Conduit Back Entry Boxes, in 316C16F stainless steel with a 316L - V4A - 1.4404 stainless steel cover, can be used as an alternative to a Dome cover. The cover can be removed for easy cable inspection, whilst the rear entry hole is ideal for tight installations.

The world's first complete Stainless Steel Conduit System, invented by Electrix®, is known for its unrivaled quality and aesthetics.

Since the system was launched over 35 years ago, it has been specified by the world's largest companies, for projects ranging from oil rigs to monuments, tunnels to chemical processing plants.

This IP69K / IP67* back entry box, complete with an internal grounding terminal, is compatible with our 20 mm Metric Conduit System.

The rear hole diameter is 20 mm.

Each back entry box is supplied with a cover, gasket, screws & washers.

Material Information
  • Material TypeStainless Steel
  • Material GradeCover: 316L - V4A - 1.4404
    Base: 316C16F
  • Material FinishCover: Satin (Brushed)
    Base: Electropolished
Dimensions
  • Conduit Ø (mm)20
  • Size Ø (mm)20
Conduit Information
  • Thread TypeMetric
  • Female ThreadMetric
  • Thread DetailsISO form 1.5 mm pitch
  • Conduit Box Ø (in.)2.35
  • Conduit Box Ø (mm)60.3
  • Gasket Material0.08" (2 mm) Neoprene Rubber
  • Number of Cover Fixings2
Ratings & Standards
  • ApprovalsUL ClassifiedIP69KIP67
  • UL InformationEvaluated in accordance with
    European Standard EN 50086
    File Number: E233497 (2MD9)
  • Environmental RatingIP69K / IP67*
  • Operating Temperature (without Impact)-25°C to +110°C (-13°F to +230°F)
For Use With
  • For Conduit Ø (mm)20
General Information
  • Supplied WithCover, Gasket & Cover Fixings
  • Ideally Suited ForOffshore, Chemical, Food, Dairy, Brewing, Pharmaceutical, Beverage, Architectural companies & many more
  • Compatible WithMetric Conduit
  • Pack Quantity1
  • Weight (lb)0.73
  • Weight (kg)0.33
  • HTS Code7307199060
  • Fine Print*IP rating is only maintained when all apertures are adequately sealed.
    In order to achieve this IP rating, the use of a suitable thread sealant is required on the final 3x threads of engagement.
    Ground continuity must be maintained at all times.
  • DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.

There are currently no reviews for this product.

Login