Skip to main content

SR15-AB32X1-S316 | WASHDOWNPRO IP66 15° Sloped Top Rotary Motor Disconnect Switch Enclosure with Removable Stand-Off Mounting Pillars

In Stock

The Ultimate Washdown Range

Our new WASHDOWNPRO shroud protected enclosure series has been designed specifically for the Food, Dairy, Brewing, Beverage and Pharmaceutical industries, where stringent cleaning guidelines are regularly observed.

These IP66 15° Sloped Top Rotary Motor Disconnect Switch Enclosures, in 316L - V4A - 1.4404 stainless steel, have been certified by NSF International 🗗, making them the ideal solution for washdown environments where high-pressure and high-temperature cleaning equipment is regularly used.

Worldwide Patented Products

Invented by Electrix®, the WASHDOWNPRO series of enclosures feature our unique IP69K / IP66 Internal Threaded Wall Fixing Points and Removable Stand-Off Mounting Pillars, to facilitate cleaning procedures and allow the enclosures to be installed a fixed distance away from the mounting surface, without compromising the Type / IP rating. These unique features save you time and money by reducing the amount of extra drilling required on site and are ideal for applications where sanitation is a priority for your installation and NEC airspace requirements need to be achieved or exceeded.

WASHDOWNPRO Sanitary Benefits:
  • Overhanging 15° Sloped Top
  • Angled Top & Fully Concealed Gasket
  • Shrouded Recessed Cover
  • Drainage Channel
  • Internal Threaded Wall Fixing Points
  • NSF Certified
  • Click here for more details 🗗

This satin (brushed) finish 15° sloped top rotary motor disconnect switch enclosure is 7.15 (8.85) x 6.75 x 4.15 (6.15) (H1 (H2) x W x D1 (D2) in.).

Complete with a 32 A (3 pole) Allen-Bradley rotary disconnect switch, auxiliary contact (1 x NO / 1 x NC), easy to clean 3/4" (19 mm) stand-off mounting pillars, DIN rail, DIN rail mounted ground terminal, cover with gasket, captive cover fixing screws, ground terminals & ground link.

Suitable as a Motor Disconnect.

IP66*

Material Information
  • Material TypeStainless Steel
  • Material Grade316L - V4A - 1.4404
  • Material FinishSatin (Brushed)
  • Surface Finish (µm Ra)< 0.5
  • Material Thickness (Gauge)16
  • Material Thickness (mm)1.5
Dimensions
  • Size - H1 (H2) x W x D1 (D2) in.7.15 (8.85) x 6.75 x 4.15 (6.15)
  • Size - H1 (H2) x W x D1 (D2) mm182 (225) x 172 x 105 (156)
  • Height 1 (in.)7.15
  • Height 1 (mm)182
  • Height 2 (in.)8.85
  • Height 2 (mm)225
  • Width (in.)6.75
  • Width (mm)172
  • Depth 1 (in.)4.15
  • Depth 1 (mm)105
  • Depth 2 (in.)6.15
  • Depth 2 (mm)156
  • Custom Design

    Custom Designs available on request.

    • Polished Finish
    • Custom sizes
    • Pre-lasered cable entry holes & laser cut apertures
    • Extra sanitary cover fixing screws
    • Security cover fixing screws
    • Gear Plates
    Click here to visit The Custom Shop.
  • Dimension TolerancesPlease refer to our CAD files for further details or contact a member of the Electrix Team.
WASHDOWNPRO Advantages
  • 15º Sloping RoofSheds unwanted liquids and prevents items being stored on top of the enclosure.

    Alternative angles (e.g. 30° Sloped Top) are available from The Custom Shop 🗗.
  • OverhangTilted upwards to limit water flowing down the front of the cover.
  • LidAngled top to encourage liquid run-off during cleaning, and a fully concealed gasket to maintain the IP rating of the enclosure.
  • Recessed Lid ProtectionThe cover of the enclosure is recessed and protected by a hood, minimizing potential damage to the installed hardware.
  • Drainage ChannelEssential for easy cleaning and reducing the opportunity for dirt and grime build-up.
  • Internal Threaded Wall Fixing PointsThe new WASHDOWNPRO range of enclosures include our unique IP66 Internal Threaded Wall Fixing Points. Invented by Electrix®, these Wall Fixing Points allow the enclosure to be installed without compromising the IP66 rating, and reduce the amount of extra drilling required on site, saving you time and money.
  • Removable Stand-Off Mounting PillarsIncluded as standard, our WASHDOWNPRO Removable Stand-Off Mounting Pillars allow your enclosure to be installed a fixed distance away from a mounting surface without compromising the IP66 rating, facilitating cleaning and washdown procedures. The pillars are threaded to allow them to fit perfectly into pre-formed holes at the rear of the enclosure, whilst the silicone washers assist with the sanitation of the installation.
Isolator / Disconnect Information
  • Switch SuppliedFitted
  • Switch BrandAllen-Bradley
  • General Use @ 600 VAC32 A
  • Number of Poles3
  • AC-21A @ 690 VAC32 A
  • AC-23A @ 230 VAC7.5 kW
  • AC-23A @ 400 VAC15.0 kW
  • AC-23A @ 690 VAC15.0 kW
  • Switching Capacity (1 PH)
    120 VAC - 1.0 HP
    240 VAC - 3.0 HP
    480 VAC - 5.0 HP
    600 VAC - 5.0 HP
  • Switching Capacity (3 PH)
    120 VAC - 3.0 HP
    240 VAC - 7.5 HP
    480 VAC - 15.0 HP
    600 VAC - 15.0 HP
  • FusedNon-Fused
  • Suitable as a Motor DisconnectYes
  • OSHA CompliantHigh visibility red / yellow handle - 3 x lockout (LO) / tagout (TO) positions
  • Switch Defeat MechanismNo
  • Black HandlesSold Separately - Part Number: AB BLACK HANDLE
Enclosure Information
  • Roof Angle15°
  • Captive Cover FixingsYes
  • Lid / Cover Gasket MaterialUL Recognized Neoprene EPDM Closed Cell (One Piece)
  • Lift-off Lid / CoverYes
  • Window Can AccommodateNo Window
  • Fixing MethodIP66 Internal Threaded Wall Fixing Points with 3/4" Removable Stand-Off Mounting Pillars - Suitable for use with 1/4" / M6 countersunk fixings when the mounting pillars are in use, and up to 5/16" / M8 countersunk fixings when the pillars are not used
  • Stand-Off Mounting Pillar Gasket MaterialBlue Silicone Rubber (FDA)
  • Internal Wall Fixing Points4
  • NEC Airspace Fixings3/4" Stand-Off Mounting Pillar exceeds NEC airspace requirements for Metal Enclosures
  • DIN RailFitted
  • DIN Rail Length (in.)5.80
  • DIN Rail Length (mm)147
  • DIN Rail Style35 mm (W) x 15 mm (H) - Top Hat
  • DIN Rail PositionHorizontal / Central
  • Compact FootprintYes
  • Adhesive labels on Lid / CoverNo
  • GroundingGround terminals & 1 x ground link*
Ratings & Standards
  • ApprovalsNSFIP66CE
  • CE InformationEN 60947-5-1
    EN 60947-3
    EN 60947-1
    EN 60670-1
    EN 60529
    EN 63000
  • Hygiene StandardsNSF/ANSI/3A 14159-1 Hygiene Requirements for
    the Design of Meat and Poultry Processing Equipment
  • Environmental RatingIP66*
  • Operating Temperature (without Impact)-25°C to +60°C (-13°F to +140°F)
General Information
  • Supplied WithRotary Motor Disconnect Switch (32 A - 3 Pole), Auxiliary Contact (1 x NO / 1 x NC), Easy to clean 3/4" Removable Stand-Off Mounting Pillars, IP66 Internal Threaded Wall Fixing Points, DIN Rail, DIN Rail Mounted Ground Terminal, Cover with Gasket, Captive Cover Fixing Screws, Ground Terminals & Ground Link
  • Ideally Suited ForOffshore, Food, Dairy, Brewing, Pharmaceutical, Beverage, Architectural companies & many more
  • Pack Quantity1
  • Weight (lb)6.70
  • Weight (kg)3.04
  • HTS Code8536308000
  • Fine Print*IP rating is only maintained when all apertures are adequately sealed. This is an open enclosure unless suitably rated auxiliary devices are installed to fill the openings.

    It is the installer's responsibility to check that the ground lead is suitable for the intended application.
  • DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.

There are currently no reviews for this product.

Login