Skip to main content

SL-XTCE10-S316 | Slimline Junction Box with Removable Stand-Off Mounting Pillars

In Stock

Electrix® Worldwide Patented Product

Electrix® Slimline Junction Boxes, in 316L - V4A - 1.4404 stainless steel, are designed to accommodate terminals & control equipment from a variety of manufacturers.

Products in this range are certified by NSF International in accordance with the ‘Hygiene Requirements for the Design of Meat and Poultry Processing Equipment’ standard.

The unrivaled quality & aesthetics of our enclosures have made them the preferred choice of worldwide processing companies for over 35 years.

Featuring our unique threaded sealed compartment wall fixing points and innovative removable threaded stand-off mounting pillars, these enclosures are the ideal solution when sanitation is a priority for your installation & NEC airspace requirements need to be achieved or exceeded.

This satin (brushed) finish slimline enclosure is 4.00 x 4.00 x 2.00 (H x W x D in.).

Complete with easy to clean 0.75" removable stand-off mounting pillars, cover with gasket, captive cover fixing screws & ground terminals.

Type 1 / 3 / 5 / 12 / 13 / 4 / 4X*
IP69K / IP66*

Material Information
  • Material TypeStainless Steel
  • Material Grade316L - V4A - 1.4404
  • Material FinishSatin (Brushed)
  • Surface Finish (µm Ra)< 0.5
  • Material Thickness (Gauge)16
  • Material Thickness (mm)1.5
Dimensions
  • Size (H x W x D in.)4.00 x 4.00 x 2.00
  • Size (H x W x D mm)102 x 102 x 51
  • Height (in.)4.00
  • Height (mm)102
  • Width (in.)4.00
  • Width (mm)102
  • Depth (in.)2.00
  • Depth (mm)51
  • Custom Design

    Custom Designs available on request.

    • Polished Finish
    • Custom sizes
    • Pre-lasered cable entry holes & laser cut apertures
    • Extra sanitary cover fixing screws
    • Security cover fixing screws
    • DIN Rails or Gear Plates
    Click here to visit The Custom Shop.
Enclosure Information
  • Lid / Cover Gasket MaterialUL Recognized Neoprene EPDM Closed Cell (One Piece)
  • Lift-off Lid / CoverYes
  • Fixing MethodM10 Threaded Sealed Wall Fixing Points with 0.75" Threaded Stand-Off Mounting Pillars - Suitable for use with 1/4" / M6 countersunk fixings when the mounting pillars are in use, and up to 5/16" / M8 countersunk fixings when the pillars are not used
  • Stand-Off Mounting Pillar Gasket MaterialBlue Silicone Rubber (FDA)
  • Internal Wall Fixing Points2
  • NEC Airspace Fixings0.75" Stand-Off Mounting Pillar exceeds NEC airspace requirements for Metal Enclosures
  • Compact FootprintYes
  • Adhesive labels on Lid / CoverNo
  • GroundingGround terminals
Ratings & Standards
  • ApprovalscULus ListedNSFIP69KIP66CE
  • UL InformationIndustrial Control Panel Enclosure
    In accordance with UL508A
    CSA C22.2 No. 14-13
    File Number: E233527
  • CE InformationEN 60670-1
    EN 60529
    EN 63000
  • Hygiene StandardsNSF/ANSI/3A 14159-1 Hygiene Requirements for
    the Design of Meat and Poultry Processing Equipment
  • Environmental RatingType 1 / 3 / 5 / 12 / 13 / 4 / 4X*
    IP66 / IP69K*
  • Operating Temperature (without Impact)-40°C to +121°C (-40°F to +250°F)
General Information
  • Supplied WithEasy to clean 0.75" Removable Stand-Off Mounting Pillars, Threaded Sealed Compartment Wall Fixing Points, Cover with Gasket, Captive Cover Fixing Screws & Ground Terminals
  • Ideally Suited ForOffshore, Food, Dairy, Brewing, Pharmaceutical, Beverage, Architectural companies & many more
  • Pack Quantity1
  • Weight (lb)1.23
  • Weight (kg)0.56
  • HTS Code7326908688
  • Fine Print*IP / TYPE rating is only maintained when all apertures are adequately sealed. This is an open enclosure unless suitably rated auxiliary devices are installed to fill the openings.
  • DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.

There are currently no reviews for this product.

Login