SL15-XPB1-S316-30.5 | 15° Sloped Top Slimline Push-Button Enclosure with Removable Stand-Off Mounting Pillars
- Material TypeStainless Steel
- Material Grade316L - V4A - 1.4404
- Material FinishSatin (Brushed)
- Surface Finish (µm Ra)< 0.5
- Material Thickness (Gauge)16
- Material Thickness (mm)1.5
- Size - H1 (H2) x W x D in.4.00 (4.75) x 4.0 x 2.75
- Size - H1 (H2) x W x D mm102 (120) x 102 x 70
- Height 1 (in.)4.00
- Height 1 (mm)102
- Height 2 (in.)4.75
- Height 2 (mm)120
- Width (in.)4.00
- Width (mm)102
- Depth (in.)2.75
- Depth (mm)70
- Custom Design
Custom Designs available on request.
- Polished Finish
- Custom sizes
- Pre-lasered cable entry holes & laser cut apertures
- Extra sanitary cover fixing screws
- Security cover fixing screws
- DIN Rails or Gear Plates
- Alternative hole configurations
- Push-Button SuppliedPush-buttons not included
Compatible with all brands of push-buttons, switches and pilot lights - Number of Holes1
- Hole Keyways4
- Hole LocationCover
- Hole Pattern1 central
- Roof Angle15°
- Lid / Cover Gasket MaterialUL Recognized Neoprene EPDM Closed Cell (One Piece)
- Lift-off Lid / CoverYes
- Fixing MethodM10 Threaded Sealed Wall Fixing Points with 0.75" Threaded Stand-Off Mounting Pillars - Suitable for use with 1/4" / M6 countersunk fixings when the mounting pillars are in use, and up to 5/16" / M8 countersunk fixings when the pillars are not used
- Stand-Off Mounting Pillar Gasket MaterialBlue Silicone Rubber (FDA)
- Internal Wall Fixing Points2
- NEC Airspace Fixings0.75" Stand-Off Mounting Pillar exceeds NEC airspace requirements for Metal Enclosures
- Compact FootprintYes
- Adhesive labels on Lid / CoverNo
- GroundingGround terminals
- Approvals
- UL InformationIndustrial Control Panel Enclosure
In accordance with UL508A
CSA C22.2 No. 14-13
File Number: E233527 - CE InformationEN 60670-1
EN 60529
EN 63000 - Hygiene StandardsNSF/ANSI/3A 14159-1 Hygiene Requirements for
the Design of Meat and Poultry Processing Equipment - Environmental RatingType 1 / 3 / 5 / 12 / 13 / 4 / 4X*
IP66 / IP69K* - Operating Temperature (without Impact)-40°C to +121°C (-40°F to +250°F)
- Supplied WithEasy to clean 0.75" Removable Stand-Off Mounting Pillars, Threaded Sealed Compartment Wall Fixing Points, Cover with Gasket, Captive Cover Fixing Screws & Ground Terminals
- Ideally Suited ForOffshore, Food, Dairy, Brewing, Pharmaceutical, Beverage, Architectural companies & many more
- Pack Quantity1
- Weight (lb)1.48
- Weight (kg)0.67
- Fine Print*IP / TYPE rating is only maintained when all apertures are adequately sealed. This is an open enclosure unless suitably rated auxiliary devices are installed to fill the openings.
- DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.
Please agree to our Terms and Conditions to download this file
* Please read and agree to the following terms to access this file.Thank you for choosing to download a CAD file.
Every effort has been made to ensure that the CAD file you are downloading is accurate, but please be advised that any drawing, image or description is for illustration purposes only.
From time to time we may update product designs, therefore if the dimensions or design of our product is a crucial for your project, it is recommended that you contact us prior to placing your order to confirm your requirements.
As per our standard Terms and Conditions 🗗, Electrix cannot be held responsible for any assumptions made by the customer with regard to the specification of the product.
You must have a registered account and be logged in to submit a review.
