Skip to main content

SL-XTCE-R-X3/4-S316 | WASHDOWNPRO IP69K / Type 4X Slimline Terminal Box (X - Intersection) with 4 x 3/4" Ø Holes and Removable Stand-Off Mounting Pillars

In Stock

The Ultimate Washdown Range

Our new WASHDOWNPRO slimline cover enclosure series has been designed specifically for the Food, Dairy, Brewing, Beverage and Pharmaceutical industries, where stringent cleaning guidelines are regularly observed.

These IP69K / Type 4X Slimline Terminal Boxes with 1" Ø Hub Entry Holes & Stand-Off Mounting Pillars, in 316L - V4A - 1.4404 stainless steel, have been certified by NSF International 🗗, making them the ideal solution for washdown environments where high-pressure and high-temperature cleaning equipment is regularly used.

Worldwide Patented Products

Invented by Electrix®, the WASHDOWNPRO series of enclosures feature our unique IP69K / IP66 Internal Threaded Wall Fixing Points and Removable Stand-Off Mounting Pillars, to facilitate cleaning procedures and allow the enclosures to be installed a fixed distance away from the mounting surface, without compromising the Type / IP rating. These unique features save you time and money by reducing the amount of extra drilling required on site and are ideal for applications where sanitation is a priority for your installation and NEC airspace requirements need to be achieved or exceeded.

WASHDOWNPRO Sanitary Benefits:

This satin (brushed) finish slimline terminal box is 6.00 x 4.00 x 2.75 (H x W x D in.) with 4 x 3/4" Ø holes ready to accommodate hubs and other devices.

Complete with easy to clean 3/4" (19 mm) stand-off mounting pillars, DIN rail, cover with gasket, captive cover fixing screws & ground terminals

IP69K / IP66*
Type 1 / 3 / 5 / 12 / 13 / 4 / 4X*

Hub kits sold separately (Part: ELEC-HUB1/0).

Material Information
  • Material TypeStainless Steel
  • Material Grade316L - V4A - 1.4404
  • Material FinishSatin (Brushed)
  • Surface Finish (µm Ra)< 0.5
  • Material Thickness (Gauge)16
  • Material Thickness (mm)1.5
Dimensions
  • Size (H x W x D in.)6.00 x 4.00 x 2.75
  • Size (H x W x D mm)152 x 102 x 70
  • Height (in.)6.00
  • Height (mm)152
  • Width (in.)4.00
  • Width (mm)102
  • Depth (in.)2.75
  • Depth (mm)70
WASHDOWNPRO Advantages
  • Internal Threaded Wall Fixing PointsThe new WASHDOWNPRO range of enclosures include our unique IP69K / IP66 / Type 4X Internal Threaded Wall Fixing Points. Invented by Electrix®, these Wall Fixing Points allow the enclosure to be installed without compromising the IP69K / IP66 / Type 4X rating, and reduce the amount of extra drilling required on site, saving you time and money.
  • Removable Stand-Off Mounting PillarsIf your installation requires thorough cleaning behind the enclosure, our WASHDOWNPRO Removable Stand-Off Mounting Pillars 🗗 are the ideal optional extra to achieve this. The pillars are threaded to allow them to fit perfectly into pre-formed holes at the rear of the enclosure, whilst the silicone washers assist with the sanitation of the installation.
  • External Wall Fixing Point Cover Kits

    In some circumstances, the installation of a WASHDOWNPRO enclosure may result in unused wall fixing points remaining visible to users.

    Electrix® enclosures maintain their IP69K / IP66 / Type 4X rating and uncompromised sanitation even with these apertures exposed. However, when you need the ultimate in sanitation and aesthetics, we recommend using our WASHDOWNPRO External Wall Fixing Point Cover Kits 🗗.

    If you would like to cover all of the wall fixing points, you will require 4 covers in total for this enclosure.

Enclosure Information
  • Captive Cover FixingsYes
  • Lid / Cover Gasket MaterialUL Recognized Neoprene EPDM Closed Cell (One Piece)
  • Lift-off Lid / CoverYes
  • Fixing MethodM10 Threaded Sealed Wall Fixing Points with 0.75" Threaded Stand-Off Mounting Pillars - Suitable for use with 1/4" / M6 countersunk fixings when the mounting pillars are in use, and up to 5/16" / M8 countersunk fixings when the pillars are not used
  • Stand-Off Mounting Pillar Gasket MaterialBlue Silicone Rubber (FDA)
  • Internal Wall Fixing Points2
  • NEC Airspace Fixings0.75" Stand-Off Mounting Pillar exceeds NEC airspace requirements for Metal Enclosures
  • DIN RailFitted
  • DIN Rail Length (in.)3.15
  • DIN Rail Length (mm)80
  • DIN Rail Style35 mm (W) x 7.5 mm (H) - Top Hat
  • DIN Rail PositionHorizontal / Central
  • Compact FootprintYes
  • Adhesive labels on Lid / CoverNo
  • GroundingGround terminals
Ratings & Standards
  • ApprovalscULus ListedNSFIP69KIP66CE
  • UL InformationIndustrial Control Panel Enclosure
    In accordance with UL508A
    CSA C22.2 No. 14-13
    File Number: E233527
  • Hygiene StandardsNSF/ANSI/3A 14159-1 Hygiene Requirements for
    the Design of Meat and Poultry Processing Equipment
  • Environmental RatingType 1 / 3 / 5 / 12 / 13 / 4 / 4X*
    IP66 / IP69K*
  • Operating Temperature (without Impact)-40°C to +121°C (-40°F to +250°F)
General Information
  • Supplied WithEasy to clean 0.75" Removable Stand-Off Mounting Pillars, Threaded Sealed Compartment Wall Fixing Points, DIN Rail, Cover with Gasket, Captive Cover Fixing Screws & Ground Terminals
  • Ideally Suited ForOffshore, Food, Dairy, Brewing, Pharmaceutical, Beverage, Architectural companies & many more
  • Pack Quantity1
  • Weight (lb)3.20
  • Weight (kg)1.45
  • HTS Code7326908688
  • Fine Print*IP / TYPE rating is only maintained when all apertures are adequately sealed. This is an open enclosure unless suitably rated auxiliary devices are installed to fill the openings.
  • DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.

There are currently no reviews for this product.

Login