- Material TypeStainless Steel
- Material Grade304 - V2A - 1.4301
- Material FinishPolished
- Surface Finish (µm Ra)< 0.5
- Material Thickness (Gauge)16
- Material Thickness (mm)1.5
- Size (H x W x D in.)5.75 x 3.50 x 2.75
- Size (H x W x D mm)146 x 89 x 70
- Height (in.)5.75
- Height (mm)146
- Width (in.)3.50
- Width (mm)89
- Depth (in.)2.75
- Depth (mm)70
- Custom Design
Custom Designs available on request.
- Satin Finish
- Custom sizes
- Pre-lasered cable entry holes & laser cut apertures
- Extra sanitary cover fixing screws
- Security cover fixing screws
- DIN Rails or Gear Plates
- Alternative hole configurations
- Stand-off mounting brackets
- Number of Holes2
- Hole Keyways4
- Hole LocationCover
- Hole Pattern2 vertical
- Push-Button SuppliedPush-buttons not included
Compatible with all brands of push-buttons, switches and pilot lights
- Lift-off Lid / CoverYes
- Fixing MethodFlat Mounting Bracket
- Bracket TypeFlat
- Bracket Fixing LocationsVertical
- DIN RailReady
- Compact FootprintYes
- Adhesive labels on Lid / CoverNo
- GroundingGround terminals & 1 x ground lead*
- UL Information(Junction & Pull Box) 61ZB
In accordance with UL50/50E
CSA C22.2 No. 94.1 & 2*
File Number: E233528
- Hygiene StandardsNSF/ANSI/3A 14159-1 Food Equipment
for use in food processing areas
- Environmental RatingIP66 / IP69K*
Type 1 / 12 / 13 / 4 / 4X*
- Operating Temperature (without Impact)-40°C to +121°C (-40°F to +250°F)
- Supplied WithFlat Mounting Bracket, Cover Gasket, Cover Fixings, Ground Terminals & Ground Link
- Ideally Suited ForFood, Dairy, Brewing, Pharmaceutical, Beverage, Architectural companies & many more
- Alternative Material Finish / Grade316L - V4A - 1.4404 /
A4 - 316 - V4A
- Pack Quantity1
- Weight (lb)2.43
- Weight (kg)1.10
- HTS Code7326908688
- Fine Print*IP rating is only maintained when all apertures are adequately sealed. This is an open enclosure unless suitably rated auxiliary devices are installed to fill the openings.
It is the installer's responsibility to check that the ground lead is suitable for the intended application.
- DisclaimerImages are representative of range and for illustration purposes only. Please check the full specifications for more information. All dimensions are subject to tolerances - please refer to the technical drawings.
Please agree to our Terms and Conditions to download this file* Please read and agree to the following terms to access this file.
Every effort has been made to ensure that the CAD file you are downloading is accurate, but please be advised that any drawing, image or description is for illustration purposes only.
From time to time we may update product designs, therefore if the dimensions or design of our product is a crucial for your project, it is recommended that you contact us prior to placing your order to confirm your requirements.
As per our standard Terms and Conditions, Electrix cannot be held responsible for any assumptions made by the customer with regard to the specification of the product.